MAX895LESA+ Overview

Tube is the way it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 2 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of P-Channel volts at its maximum output.The MAX895 family contains this object.It consists of 8 terminations in total.It contains 1 functions.The maximum output current must drop to 375mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.There is 250mOhm resistance on the LED driver.There is an analog input IC in this gadget, which is DUAL SWITCHING CONTROLLER.It is recommended to set the supply voltage to 5.5V for optimum efficiency.A maximum input voltage of 5.5V volts can be applied to it.As far as input voltage goes, it has a minimum of 2.7V volts.In order to operate, it requires at most 0.05mA amps of supply current.It is equipped with 1 input.

MAX895LESA+ Features

Resistance of 250mOhm

MAX895LESA+ Applications

There are a lot of Maxim Integrated MAX895LESA+ Power Switches ICs applications.

• Wireless/Networking Cards
• Solid-State Drives
• Portable GPS Device
• Portable Music Players
• PC Card Hot Swap
• HDD and SSD
• USB Protection
• Hot Swaps
• Telecom and Network Systems
• Low Voltage I/O System Power