MAX9025EBT+T Overview

The product is packaged in 6-WFBGA, CSPBGA in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .The part is shipped by Tape & Reel (TR) .The comparator has 6 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type with Voltage Reference .Currently, it consists of only 1 elements.The device includes 6 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.6 pins are available on the comparator.In order to find a solution that meets your specific needs, search MAX9025 for more pin-to-pin solutions.A quiescent current of 2.2μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 1.7μA .An excess of current supply over 1.7μA could result in malfunction of the comparator.A power supply of 5V is sufficient for the operation of the device.You are allowed to input a maximum current of 1nA into the device.The part belongs to the Beyond-the-Rails™ series of comparator parts.

MAX9025EBT+T Features

CMOS, Push-Pull, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.2μA

MAX9025EBT+T Applications

There are a lot of Maxim Integrated
MAX9025EBT+T linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices