MAX9065EBS+TG45 Overview

A convenient transport package is provided in 4-WFBGA, CSPBGA .The comparator has a Push-Pull output.The part will be shipped by Tape & Reel (TR) .There are 4 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 3.3V voltage.Electronic comparator is possible to classify the chip as Window .In total, it contains 1 elements.As a result, it contains 4 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .The comparator is equipped with 4 pins.Search MAX9065 to find more pin-to-pin solutions.There is a quiescent current of 1.35μA in this comparator.The PCB or other board has a Surface Mount for mounting.In order to run the device, there are only 3.3V power supplies required.An increase in temperature over 85°C is not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .

MAX9065EBS+TG45 Features

Push-Pull output capability
Window IC
Employing 1 elements
Quiescent Current: 1.35μA

MAX9065EBS+TG45 Applications

There are a lot of Maxim Integrated
MAX9065EBS+TG45 linear comparators applications.

• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics