MAX912EPE+ Overview

For convenience, it is packaged in 16-DIP (0.300, 7.62mm) .There is a Complementary, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 16 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator consists of 2 elements in total.Electronic comparator has 16 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 16 .You can find more pin-to-pin solutions by searching MAX912 .As a result, this comparator displays a quiescent current of 10mA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 10mA when using the device.A supply current exceeding 10mA may result in the comparator malfunctioning.There is sufficient power to run the device from 5/+-5V power supplies.You can input a maximum current of 5μA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 70.88dB .

MAX912EPE+ Features

Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB

MAX912EPE+ Applications

There are a lot of Maxim Integrated
MAX912EPE+ linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets