MAX9172ESA+T Overview

An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.There is usually a 2-bit resolution specified for this receiver when it is used.There is a 3.3V input voltage supply that can be used to operate this transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The integrator circuit is embedded with 2 drivers.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 9mA.The interface IC type of ic receiver is LINE RECEIVER, which is used to control and manage the sharing of information between devices.ICs in this transceiver module cannot operate over 85°C.The manufacturer recommends a supply voltage below 3.6V for this transceiver module.It is recommended to keep the operating temperature above -40°C.

MAX9172ESA+T Features

8 pin count

MAX9172ESA+T Applications

There are a lot of Maxim Integrated MAX9172ESA+T Drivers/Receivers/Transceivers applications.

• Bar, KTV wireless entertainment
• interconnection between switches
• Wireless interactive experience
• Gigabit Ethernet
• Ethernet circuitry
• Mainframes, workstations or storage devices
• Wireless modems
• Fast Ethernet
• Sensor reporting
• Radio transmission