MAX919ESA+ Overview

To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The chip is packaged with Tube .The device is designed with 8 terminations.The chip belongs to Comparators .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 1 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX919 .A quiescent current of 1.2μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 800nA supply current.If the current supply exceeds 800nA , the comparator might be damaged.This device requires 2/5V power supplies to operate.Input current to the device cannot exceed 1nA .The part is based on Beyond-the-Rails™ .

MAX919ESA+ Features

CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA

MAX919ESA+ Applications

There are a lot of Maxim Integrated
MAX919ESA+ linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators