MAX920ESA+T Overview

For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Open-Drain, Rail-to-Rail output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparators family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching MAX920 .As a result, this comparator displays a quiescent current of 1.2μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 800nA when using the device.A supply current exceeding 800nA may result in the comparator malfunctioning.There is sufficient power to run the device from 2/5V power supplies.A comparator part from the Beyond-the-Rails™ series is used in this part.

MAX920ESA+T Features

Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA

MAX920ESA+T Applications

There are a lot of Maxim Integrated
MAX920ESA+T linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets