MAX924CPE+ Overview
A convenient transport package is provided in 16-DIP (0.300, 7.62mm) .The comparator has a CMOS, TTL output.The part will be shipped by Tube .There are 16 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.Electronic comparator is possible to classify the chip as with Voltage Reference .In total, it contains 4 elements.As a result, it contains 16 pins.Electronic comparator is recommended that you mount the device using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator is equipped with 16 pins.Search MAX924 to find more pin-to-pin solutions.There is a quiescent current of 11μA in this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current be 6.5μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 6.5μA .In order to run the device, there are only 3/5V power supplies required.
MAX924CPE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 11μA
MAX924CPE+ Applications
There are a lot of Maxim Integrated
MAX924CPE+ linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
