MAX931CSA+T Overview

In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Voltage Reference .A total of 1 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for MAX931 to find more pin-to-pin solutions for your specific needs.There is 4μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 3.2μA .A current supply greater than 3.2μA may cause the comparator to malfunction.

MAX931CSA+T Features

CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 4μA

MAX931CSA+T Applications

There are a lot of Maxim Integrated
MAX931CSA+T linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications