MAX941EUA-T Overview

The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, TTL .The part is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .This is a typical comparator of type with Latch, Shutdown .Currently, it consists of only 1 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search MAX941 for more pin-to-pin solutions.A quiescent current of 700μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 600μA .An excess of current supply over 600μA could result in malfunction of the comparator.A power supply of 3/5V is sufficient for the operation of the device.You are allowed to input a maximum current of 150nA into the device.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.

MAX941EUA-T Features

CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA

MAX941EUA-T Applications

There are a lot of Maxim Integrated
MAX941EUA-T linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices