MAX9627ATC+ Overview

OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. In the case of Strip cases, linear amplifier will be delivered. During the past two weeks, there have been close to 12 terminations. The pins on this board total to 12 in total. Please take in mind that this instrumentation amplifier should be run at 3.3V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 12 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. A supply current of 59mA can be used to operate this linear amplifier. The buffer amp consists of 1 circuits in total. For this linear amplifier to work, the temperature should not be below -40°C. It should only be used at temperatures up above 125°C. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.25V, and this is an excellent feature. As a general rule, it is advisable to keep the op amp's supply voltage above 2.85V at all times.

MAX9627ATC+ Features

12 Pins
supply voltage of 3.3V

MAX9627ATC+ Applications

There are a lot of Maxim Integrated MAX9627ATC+ Instrumentational OP Amps applications.

• Polarized electrodes
• Professional videography
• Cinema or auditorium audio system
• Power control
• High-frequency data acquisition systems
• Medical imaging
• pH (acidity)
• Communication device
• Integrator circuits
• Signal operation