MAX9634FERS+T Overview

Packaged in a 4-WFBGA, CSPBGA case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Current Sense-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 4 terminations over the past year. As a reminder, this buffer op amp should be powered by 3.6V battery and that the battery should be inserted in the amplifier. 4 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 1.1μA. During the manufacturing process, this buffer amplifier is divided into 1 circuits. On the buffer amps, there are 1 channels that can be used. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 30V. The linear amplifier's supply voltage should be higher than 1.6V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 30V volts. nanoPower is the number that corresponds to the series of the buffer op amp. In this linear amplifier, there is also an analog IC called a POWER SUPPLY SUPPORT CIRCUIT. Here is an additional benefit of this buffer op amp that you may find helpful: RESET THRESHOLD VOLTAGE IS 28.5V.

MAX9634FERS+T Features

supply voltage of 3.6V

MAX9634FERS+T Applications

There are a lot of Maxim Integrated MAX9634FERS+T Instrumentational OP Amps applications.

• Navigation
• Wireless base stations
• Mobile phone
• Switching amplifier
• Car stereo
• Power control
• Thermocouples
• Portable docking station
• Broadcasting
• Commercial audio systems