MAX9646EBS+TG45 Overview

The product is packaged in 4-WFBGA, CSPBGA in order to facilitate transportation.Output type of this comparator is Push-Pull .The part is shipped by Tape & Reel (TR) .The comparator has 4 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3.3V .This is a typical comparator of type General Purpose .Currently, it consists of only 1 elements.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.4 pins are available on the comparator.In order to find a solution that meets your specific needs, search MAX9646 for more pin-to-pin solutions.A quiescent current of 1.1μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 700nA .An excess of current supply over 700nA could result in malfunction of the comparator.You are allowed to input a maximum current of 15nA into the device.

MAX9646EBS+TG45 Features

Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.1μA

MAX9646EBS+TG45 Applications

There are a lot of Maxim Integrated
MAX9646EBS+TG45 linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices