MX574AKP+T Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 28-LCC (J-Lead) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 15V.The A/D converter has 1 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 245 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 40k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±11.4V~16.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MX574A family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Dual is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 5V.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.1 inputs are employed. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 265mW.The conversion rate of this electrical AD converter is calculated as 40 ksps.There are 2 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal.

MX574AKP+T Features

1 Functions
28 basic kinds of terminations
28 pin count

MX574AKP+T Applications

There are a lot of Maxim Integrated MX574AKP+T ADC applications.

• Medical Imaging
• Spectrum Analysis
• CMOS Image sensors for mobile applications
• Music recording
• High Speed Data Acquisition for PCs
• Digital signal processing
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Digital Storage Oscilloscope
• 3-phase power control
• Transducer