MXD1810UR41+T Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. In a 3.6V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 9μA. It is always advisable to use MXD1810, the base supervisor number, when searching for similar PMICs from the manufacturer.

MXD1810UR41+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current

MXD1810UR41+T Applications

There are a lot of Maxim Integrated MXD1810UR41+T Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Urban rail transit weak current power monitoring
• Power distribution systems of operating room
• Insulation fault location system
• Set top box
• Radar
• Unattended substation automation
• DVR
• FPGA design
• DSP