MXD1815XR22+T Overview

This power management consists of 3 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached SC-70, SOT-323 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 3 pins on IC management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MXD1815, the base power ics number.

MXD1815XR22+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current

MXD1815XR22+T Applications

There are a lot of Maxim Integrated MXD1815XR22+T Voltage Supervisors applications.

• Detection of phase imbalance
• Analog circuit
• Electrical fire monitoring system
• Medical-specific insulation monitor
• Unattended substation automation
• FPGA design
• Power distribution systems of operating room
• Leakage current detection
• Battery cars
• Military communications