MXD1817UR29+T Overview

Power management is mounted through 3 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3.6V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 3 pins. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~105°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 9μA. A similar IC managements number of the manufacturer can always be found by using MXD1817, the base power ics number.

MXD1817UR29+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current

MXD1817UR29+T Applications

There are a lot of Maxim Integrated MXD1817UR29+T Voltage Supervisors applications.

• Detection of phase sequence
• Power distribution systems of infant care room
• Unattended substation automation
• Personal computers
• Magnetic resonance imaging
• Consumer electronics
• Power communication system
• Computer applications
• Battery-powered equipment
• Sensitive sensors