Automotive, AEC-Q100 Memory IC Automotive, AEC-Q100 Series 23LC1024 4.9mm mm
SOT-23
23LC1024-I/SNVAO Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Series
Automotive, AEC-Q100
JESD-609 Code
e3
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
Terminal Finish
Matte Tin (Sn)
Technology
SRAM - Synchronous, SDR
Voltage - Supply
2.5V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Terminal Pitch
1.27mm
Reach Compliance Code
compliant
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
23LC1024
JESD-30 Code
R-PDSO-G8
Supply Voltage-Max (Vsup)
5.5V
Supply Voltage-Min (Vsup)
2.5V
Memory Size
1Mb 128K x 8
Memory Type
Volatile
Clock Frequency
20MHz
Supply Current-Max
0.01mA
Memory Format
SRAM
Memory Interface
SPI - Quad I/O
Organization
128KX8
Output Characteristics
3-STATE
Memory Width
8
Standby Current-Max
0.000012A
Memory Density
1048576 bit
Access Time (Max)
25 ns
Parallel/Serial
SERIAL
I/O Type
COMMON/SEPARATE
Standby Voltage-Min
2.5V
Output Enable
NO
Reverse Pinout
NO
Height Seated (Max)
1.75mm
Length
4.9mm
Width
3.9mm
RoHS Status
RoHS Compliant
23LC1024-I/SNVAO Product Details
23LC1024-I/SNVAO Overview
A Volatile-type memory can be classified as the memory type of this device. Tube-cases are available. The case is embedded in 8-SOIC (0.154, 3.90mm Width). This chip has an 1Mb 128K x 8 size of memory on it, so a lot of data can be stored on it. This device uses takes advantage of the SRAM format. With an extended designed operating temperature of -40°C~85°C TA, this device is capable of lots of demanding applications. The device is capable of handling a supply voltage of 2.5V~5.5V. The recommended mounting type for memory ics is Surface Mount. As you can see from the diagram, the chip is planted with 8 terminations. This part supports as many as 1 functions for the comprehensive working procedure. In order to operate effectively, the memory rotates at a clock frequency within a range of 20MHz. As the base part number for the device, 23LC1024 is frequently used to select similar items. As part of the design, the I/O port addresses are mapped into the memory using an COMMON/SEPARATE-bit number. In its target applications, this memory ics plays an important role as a member of the Automotive, AEC-Q100 series of memory devices. As far as the supply current is concerned, it can be operated with a maximum of 0.01mA of current