2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED
Technology
CMOS
Voltage - Supply
1.8V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
24AA00
Pin Count
8
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
2/5V
Interface
2-Wire, I2C, Serial
Memory Size
128b 16 x 8
Memory Type
Non-Volatile
Clock Frequency
400kHz
Supply Current-Max
0.002mA
Access Time
3500ns
Memory Format
EEPROM
Memory Interface
I2C
Memory Width
8
Write Cycle Time - Word, Page
4ms
Density
128 b
Standby Current-Max
0.000001A
Serial Bus Type
I2C
Endurance
1000000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
4ms
Data Retention Time-Min
200
I2C Control Byte
1010XXXR
Height Seated (Max)
1.1mm
Length
4.4mm
Width
3mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
24AA00/ST Product Details
24AA00/ST Overview
As far as memory types are concerned, Non-Volatile is considered to be its memory type. It is supplied votage within Tube. As you can see, it is embedded in 8-TSSOP (0.173, 4.40mm Width) case. On the chip, there is an 128b 16 x 8 memory, which is the size of the chip's memory. There is a EEPROM-format memory used in this device, which is the memory format used by mainstream devices. A wide operating temperature range makes this device ideal for a variety of demanding applications. The device is capable of handling a supply voltage of 1.8V~5.5V volts. There is a recommendation that Surface Mount mounting type should be used for this product. A total of 8 terminations have been planted on the chip. In total, 1 functions are supported by this part. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. It is important to note that the memory has a clock frequency rotation within the range of 400kHz. In order to select similar parts, typical manufacturers refer to 24AA00 as the device's base part number. A package of 8 pins is used to protect this memory device. The memory device in question has 8 pins, thus indicating that it has 8 memory locations that can be accessed. The memory chip also offers 2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED to level up system performance despite its merits. In terms of power requirements, this memory chip uses only 2/5V . Integrated into this memory is a I2C-type serial bus that facilitates data transmission to the CPU. In order for it to operate properly, memory ics requires a maximum supply current of 0.002mA .