25LC080B-E/P Overview

There is a memory type Non-Volatile for this type of device. It is supplied votage within Tube. In the case of 8-DIP (0.300, 7.62mm), it is embedded within the case. There is an 8Kb 1K x 8 memory capacity on the chip. Memory data is stored in EEPROM-format, which is common in mainstream devices. With an extended designed operating temperature of -40°C~125°C TA, this device is capable of lots of demanding applications. The device is capable of handling a supply voltage of 2.5V~5.5V volts. As far as the mounting type is concerned, Through Hole is recommended. A total of 8 terminations have been planted on the chip. As many as 1 functions are supported for comprehensive working. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. During the rotation of the clock, the ic memory chip is set as 10MHz. In order to select similar parts, typical manufacturers refer to 25LC080B as the device's base part number. A package of 8 pins is used to protect this memory device. I have noticed that the memory device has 8 pins, which indicates that it has 8 locations in the memory. As a result of the Through Hole mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. The nominal supply current of this memory component is 6mA. As for power supplies, this memory chip requires just 3/5V . Integrated into this memory is a SPI-type serial bus that facilitates data transmission to the CPU. There are 13 programmable I/O ports on the device, which makes it suitable for a wide range of devices. There is no maximum value for the number of timers/counters that can be supported by this device.

25LC080B-E/P Features

Package / Case: 8-DIP (0.300, 7.62mm)
8 Pins
13 Programmable I/Os

25LC080B-E/P Applications

There are a lot of Microchip Technology 25LC080B-E/P Memory applications.

• DVD disk buffer
• embedded logic
• graphics card
• nonvolatile BIOS memory
• hard disk drive (HDD)
• Camcorders
• data buffer
• personal digital assistants
• printers
• networks