93AA76AT-I/ST Overview

In terms of its memory type, it can be classified as Non-Volatile. You can get memory ics in a Tape & Reel (TR) case. An embedded 8-TSSOP (0.173, 4.40mm Width) case surrounds memory ics. This chip has an 8Kb 1K x 8 size of memory on it, so a lot of data can be stored on it. This device uses a EEPROM-format memory, which is of mainstream design. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The device is capable of handling a supply voltage of 1.8V~5.5V volts. It is recommended to mount it in the Surface Mount mounting type. The memory has a clock frequency rotation within 3MHz. In order to select similar parts, typical manufacturers refer to 93AA76A as the device's base part number. In this ic memory chip, there is an 8-pin package that encloses the device. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. Memory chip's nominal supply current is 3mA. A minimum operating temperature of -40°C must be met by this device. Temperatures no higher than 85°C degrees Celsius are recommended for operation. This part should have a minimum supply voltage of at least 1.8V volts in order to function correctly. This part requires a minimum voltage of 5.5V. Data is processed by this memory ics at a frequency of 3MHz. In terms of speed, this memory can operate at a maximum frequency of 1MHz.

93AA76AT-I/ST Features

Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Freguency at 3MHz
3MHz terminals

93AA76AT-I/ST Applications

There are a lot of Microchip Technology 93AA76AT-I/ST Memory applications.

• personal computers
• embedded logic
• personal digital assistants
• servers
• hard disk drive (HDD)
• Camcorders
• multimedia computers
• eDRAM
• nonvolatile BIOS memory
• cell phones