3/5V V Automotive, AEC-Q100 Memory IC Automotive, AEC-Q100 Series 4.4mm mm
SOT-23
AT25040B-XPD-T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-TSSOP (0.173, 4.40mm Width)
Surface Mount
YES
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Series
Automotive, AEC-Q100
JESD-609 Code
e4
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
HTS Code
8542.32.00.51
Technology
CMOS
Voltage - Supply
2.5V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.65mm
Reach Compliance Code
compliant
[email protected] Reflow Temperature-Max (s)
40
JESD-30 Code
R-PDSO-G8
Qualification Status
Not Qualified
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
3/5V
Supply Voltage-Min (Vsup)
2.5V
Memory Size
4Kb 512 x 8
Memory Type
Non-Volatile
Operating Mode
SYNCHRONOUS
Clock Frequency
5MHz
Supply Current-Max
0.006mA
Memory Format
EEPROM
Memory Interface
SPI
Organization
512X8
Memory Width
8
Write Cycle Time - Word, Page
5ms
Standby Current-Max
0.000003A
Memory Density
4096 bit
Parallel/Serial
SERIAL
Serial Bus Type
SPI
Endurance
1000000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
5ms
Data Retention Time-Min
100
Write Protection
HARDWARE/SOFTWARE
Height Seated (Max)
1.2mm
Length
4.4mm
Width
3mm
RoHS Status
RoHS Compliant
AT25040B-XPD-T Product Details
AT25040B-XPD-T Overview
In terms of its memory type, it can be classified as Non-Volatile. In addition, memory ics is available in a Tape & Reel (TR) case as well. An embedded 8-TSSOP (0.173, 4.40mm Width) case surrounds memory ics. This chip has an 4Kb 512 x 8 size of memory on it, so a lot of data can be stored on it. This device utilizes a EEPROM format memory which is of mainstream design. A wide operating temperature range makes this device ideal for a variety of demanding applications. There is a voltage range of 2.5V~5.5V for the supply voltage. Its recommended mounting type is Surface Mount. A total of 8 terminations have been planted on the chip. The comprehensive working procedure is supported by 1 functions in this part. The memory device designed for this application has been designed to be powered by an 5V power supply. A clock frequency rotation within 5MHz is used for the ic memory chip to rotate data. Power supplies for this memory chip are merely 3/5V . In its target applications, this memory ics plays an important role as a member of the Automotive, AEC-Q100 series of memory devices. By integrating with the SPI-type serial bus, this memory transmits data to the processor. As far as the supply current is concerned, it can be operated with a maximum of 0.006mA of current
AT25040B-XPD-T Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
AT25040B-XPD-T Applications
There are a lot of Microchip Technology AT25040B-XPD-T Memory applications.