AT25080A-10TU-2.7 Overview

Non-Volatile is the type of memory it has. You can get memory ics in a Tube case. As you can see, it is embedded in 8-TSSOP (0.173, 4.40mm Width) case. There is 8Kb 1K x 8 of memory on the chip. Memory data is stored in EEPROM-format, which is common in mainstream devices. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. It is capable of handling a voltage supply of 2.7V~5.5V. A Surface Mount mounting type is recommended for this product. During the rotation of the clock, the ic memory chip is set as 20MHz. To select similar parts, many people use the device's base part number AT25080. There are 8 pins on the package of the memory device. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. As far as its nominal supply current is concerned, this memory component carries a rating of 10mA. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. This memory ics requires a minimum voltage of 2.7V. Ideally, this part should be supplied with a voltage of at least 5.5V. This memory chip processes data at a frequency of 20MHz. There is a maximum frequency of 10MHz that can be accessed by this memory.

AT25080A-10TU-2.7 Features

Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:5V
Freguency at 20MHz
20MHz terminals

AT25080A-10TU-2.7 Applications

There are a lot of Microchip Technology AT25080A-10TU-2.7 Memory applications.

• supercomputers
• mainframes
• main computer memory
• Camcorders
• hard disk drive (HDD)
• servers
• printers
• graphics card
• DVD disk buffer
• data buffer