HCS360T-I/SN Overview

In package 8-SOIC (0.154, 3.90mm Width), you will find the ICs.The package Tape & Reel (TR) contains integrated circuit.Mounting is done using the Surface Mount method.Code Hopping Encoder is the type of the integrated circuit system.You can find similar integrated circuit systems by searching for the HCS360 family.In this case, it would be appropriate to apply the ICs in Remote Secure Access, Keyless Entry.In total, there are 8 terminations on the ICs solutions.8 pins are available on the ICs applications.Ideally, this logic gate IC should be operated at 5V.Surface Mount is recommended for mounting this ICs application.The integrated circuit chip's temperature should not be higher than 85°C when you use it.The integrated circuit system should not operate lower than -40°C operating temperature.On integrated circuit chip, there are 8 pins.There are several electrical ICs applications in the KEELOQ? series, including this one.The integrated circuit can operate at a supply voltage of 6.6V.This integrated circuit requires a voltage of at least 2V.A maximum supply current of 1.6mA is set for the logic ICs.At 700μA supply current, this IC integrated circuit will work fine.

HCS360T-I/SN Features

Applications : Remote Secure Access, Keyless Entry
It belongs to KEELOQ? Series
Operating Supply Current at 700μA

HCS360T-I/SN Applications

There are a lot of Microchip Technology HCS360T-I/SN Specialized ICs applications.

• PDAs and Palmtop Devices
• Adapters requiring ultra low no-load consumption
• All AC-DC converters with X capacitors of 100 nF up to 6 mF
• μP Switch Interfacing
• Peripheral Authentication
• Message Security
• Reference Design License Management
• Appliances requiring ErP Lot 6 compliance
• IoT Node Authentication
• Anti-cloning