HV9120NG-G Overview

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 10V~450V. Worked in an dc switcher with a -55°C~125°C TJ rating. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Reset. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. Other relevant dc to dc converter ics can be found by searching "HV9120". There are only 16 pins on switching converter. DC regulator outputs 4.08V voltage based on test statistics. You should note that the dc dc regulator's usual output current is -2mA. voltage regulator dc to dcs with a 49.6 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 3MHz Hz. It is possible to set the input voltage as 450V for nominal working statuses. The supply voltage must be 10V.

HV9120NG-G Features

Transistor Driver Outputs
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 49.6 %
Frequency: 3MHz

HV9120NG-G Applications

There are a lot of Microchip Technology HV9120NG-G DC to DC converter applications.

• Combined machine tools

• Fire elevators

• Geothermal power

• Plate bending machines

• Pipe bending machines

• Wide-range voltage regulation circuits

• Special machining machine tools

• Electric heating, lighting

• Bending machines

• Boring machines