MCP102-450E/TO Overview

A total of 3 terminals are used to mount this power management. Power management is packaged in a Bulk way. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 1-voltage supply. Through Hole mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. 3 pins are present in total in this power management. There are 3 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP102, the base power ics number. A maximum supply temperature of 1.75μA can be used with this power management.

MCP102-450E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP102-450E/TO Applications

There are a lot of Microchip Technology MCP102-450E/TO Voltage Supervisors applications.

• Electronics installed in the vehicle
• FPGA design
• Insulation fault location system
• DVR
• Medical-specific insulation monitor
• Unattended substation automation
• Electric heating appliances
• Data storage applications
• Power distribution systems of infant care room
• Power communication system