MCP103T-475E/LB Overview

A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-70, SOT-323 functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. The pins of the power management system count 3. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 1.75μA. It is always advisable to use MCP103, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 1.75μA.

MCP103T-475E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP103T-475E/LB Applications

There are a lot of Microchip Technology MCP103T-475E/LB Voltage Supervisors applications.

• Microcontroller system
• Electronics installed in the vehicle
• Battery cars
• Electrical fire monitoring system
• Computer applications
• Rechargeable batteries
• emergency room
• Medical-specific isolation transformer
• WiFi router
• Battery cars