MCP111-270E/TO Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Bulk. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Power management conducts at a voltage of 1. Through Hole mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. 3 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Through HoleThis power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 1.75μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP111, which is the base power ics number. The maximum supply temperature is 1.75μA.

MCP111-270E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-270E/TO Applications

There are a lot of Microchip Technology MCP111-270E/TO Voltage Supervisors applications.

• Electrical fire monitoring system
• Personal computers
• Transformer load monitoring equipment
• Rechargeable batteries
• emergency room
• Battery cars
• Important electronics for automotive safety
• Analog circuit
• Insulation fault location system
• Utility meter