MCP111-290E/TO Overview

A total of 3 terminals are used to mount this power management. Bulk-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 3. Pin count of the power management is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 1.75μA, this PMIC is capable of fully function as specified. You can always use MCP111, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

MCP111-290E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-290E/TO Applications

There are a lot of Microchip Technology MCP111-290E/TO Voltage Supervisors applications.

• FPGA design
• Important electronics for automotive protection
• Power distribution systems of CCU
• Military communications
• Power distribution systems of operating room
• Rechargeable batteries
• Linux and server computing
• WiFi router
• Utility meter
• Transformer load monitoring equipment