MCP111-450E/TO Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Bulk model. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When a supply voltage of 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 3. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 1.75μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MCP111. The maximum supply temperature voltage supervisor can handle is 1.75μA.

MCP111-450E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-450E/TO Applications

There are a lot of Microchip Technology MCP111-450E/TO Voltage Supervisors applications.

• Power distribution systems of operating room
• Telecommunications equipment
• Embedded computing
• Electronics installed in the vehicle
• Kitchen appliances
• Microcontroller system
• Refrigeration
• Data storage applications
• Smart meter
• Cloud computing