MCP111-475E/TO Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Bulk. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management conducts in a 1-voltage supply. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Through Hole is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 1.75μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MCP111, the base power ics number. The maximum supply temperature is 1.75μA.

MCP111-475E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-475E/TO Applications

There are a lot of Microchip Technology MCP111-475E/TO Voltage Supervisors applications.

• Linux and server computing
• Power distribution systems of infant care room
• Fire equipment power monitoring system
• Unattended substation automation
• Data storage applications
• Smart meter
• Leakage protection
• Transformer load monitoring equipment
• Computer applications
• Detection of phase loss