MCP111T-450E/LB Overview

As you can see, this power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. Please find attached SC-70, SOT-323 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 3 pins on power management. 3 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 1.75μA. It is always advisable to use MCP111, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.75μA can be used.

MCP111T-450E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111T-450E/LB Applications

There are a lot of Microchip Technology MCP111T-450E/LB Voltage Supervisors applications.

• Telecommunications equipment
• Power distribution systems of CCU
• Detection of phase loss
• Precision measurement
• Household appliances
• Network equipment
• Personal computers
• Consumer electronics
• DVR
• Refrigeration