MCP120-315I/SN Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. 8 pins are present in total in this power management. There are 8 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 60μA. You can always use MCP120, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 60μA.

MCP120-315I/SN Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120-315I/SN Applications

There are a lot of Microchip Technology MCP120-315I/SN Voltage Supervisors applications.

• Power communication system
• Unattended substation automation
• Automotive power systems
• Dash board
• Embedded computing
• Detection of phase sequence
• Household appliances
• Insulation fault location system
• Transformer load monitoring equipment
• Power distribution systems of ICU