MCP120-450GI/TO Overview

Power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Bulk. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In a 5V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Through Hole. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Through HoleIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MCP120, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.

MCP120-450GI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120-450GI/TO Applications

There are a lot of Microchip Technology MCP120-450GI/TO Voltage Supervisors applications.

• Embedded computing
• Telecommunications equipment
• Solar power charger
• Leakage current detection
• Computer applications
• External alarm
• Sensitive sensors
• Stable power system
• Battery-powered equipment
• Utility meter