MCP120-460DI/TO Overview

It is mounted through 3 terminals on the power management. Packaging is in the form of a Bulk. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. Through Hole mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 3 pins. Power managment ic pin count is 3. Supply voltage (Vsup) should be at least 1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 60μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP120, which is the base power ics number. A maximum supply temperature of 60μA can be used.

MCP120-460DI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120-460DI/TO Applications

There are a lot of Microchip Technology MCP120-460DI/TO Voltage Supervisors applications.

• Dash board
• Power distribution systems of operating room
• WiFi router
• Power communication system
• Detection of phase imbalance
• Microprocessor system
• Automotive power systems
• Important electronics for automotive protection
• Unattended substation automation
• Refrigeration