MCP120T-485I/SN Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 60μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MCP120, the base power ics number. A maximum supply temperature of 60μA can be used with this power management.

MCP120T-485I/SN Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120T-485I/SN Applications

There are a lot of Microchip Technology MCP120T-485I/SN Voltage Supervisors applications.

• Dash board
• DC stabilized power supply module
• Refrigeration
• Embedded computing
• Military electronics
• Analog circuit
• Medical-specific insulation monitor
• Set top box
• Display equipment
• Detection of phase loss