MCP130-315HI/TO Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. There is a Bulk-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In a 5V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 3 pins. 3 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 60μA. To find similar IC managements from the manufacturer, you can always search by MCP130. Voltage supervisor can work with a supply temperature of 60μA at the most.

MCP130-315HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130-315HI/TO Applications

There are a lot of Microchip Technology MCP130-315HI/TO Voltage Supervisors applications.

• Utility meter
• Solar power charger
• Functional modules
• Rechargeable batteries
• Power distribution systems of infant care room
• Detection of phase imbalance
• Set top box
• Personal computers
• DSP
• Leakage current detection