MCP130-475FI/TO Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Bulk. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. By Through Hole, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. Power managment ic pin count is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Through Hole is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. The power management's supply current is 60μA. It is always advisable to use MCP130, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 60μA at the most.

MCP130-475FI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130-475FI/TO Applications

There are a lot of Microchip Technology MCP130-475FI/TO Voltage Supervisors applications.

• Household appliances
• Military communications
• Important electronics for automotive safety
• Digitally controlled LDO regulators circuit
• FPGA design
• Power distribution systems of CCU
• Precision measurement
• Leakage current detection
• Personal computers
• Sensitive sensors