MCP130-485HI/TO Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. There is a Bulk-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Through Hole mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Through Hole mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MCP130, the base PMIC number. A maximum supply temperature of 60μA can be used.

MCP130-485HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP130-485HI/TO Applications

There are a lot of Microchip Technology MCP130-485HI/TO Voltage Supervisors applications.

• emergency room
• DSP
• Military communications
• Precision measurement
• Efficient information transmission
• Automotive permanent magnet synchronous motors
• Detection of phase sequence
• Multi-voltage system
• DVR
• Magnetic resonance imaging