MCP131-270E/TO Overview

It is mounted through 3 terminals on the power management. Power management is packaged in a Bulk way. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 3 pins. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Through Hole is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 90μA. For similar manage ics search of the manufacturer, you can always refer to MCP131, the base PMIC number. The maximum supply temperature voltage supervisor can handle is 90μA.

MCP131-270E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current

MCP131-270E/TO Applications

There are a lot of Microchip Technology MCP131-270E/TO Voltage Supervisors applications.

• Stable power system
• Automotive permanent magnet synchronous motors
• Household appliances
• emergency room
• Telecommunications equipment
• Power distribution systems of infant care room
• Detection of phase sequence
• Consumer electronics
• Detection of phase loss
• DVR