MCP1624-I/MC Overview

There are a total of 1 outputs supported by the voltage regulator. The alternator regulator is packaged in a 8-VFDFN Exposed Pad container to facilitate transportation. The power regulator is ready for shipment in Tube. An output voltage of 2V~5.5V is provided by this power supply regulator. Surface Mount Universal mount that facilitates easy adaptation. The electrical regulator is targeted at Converter, PIC? Microcontrollers and other applications. In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C. Input voltage for this external regulator is designed to be 0.8V~5.5V. There are 8terminals on the voltage regulator. The electronic part is widely regarded as a regulator of type SWITCHING REGULATOR. The rectifier regulator's pinout begins with 8pins. If you are trying to find pin-to-pin solutions, try searching MCP1624. There are 6 pins on the power supply regulator. The AC voltage regulator and other Switching Regulator or Controllers play an important role in the industry. The normal operation of the system requires 5.5V operating voltage. It is recommended that the electrical regulator outputs a value of 50mA at the present time. It is required that the input voltage be higher than 650mV. There is the possibility of switching the voltage controller at a frequency of 500kHz.

MCP1624-I/MC Features

Widely used in Converter, PIC? Microcontrollers applications
SWITCHING REGULATOR analog IC
Supply voltage: 5.5V

MCP1624-I/MC Applications

There are a lot of Microchip Technology MCP1624-I/MC Specialized Voltage Regulators applications.

• FPGAs
• Servers and Networking equipment
• MFP
• TFT LCD Bias Supplies
• Graphics Processor Core Supplies
• DDR I or DDR II Termination
• Handheld Instruments
• Notebooks
• Point of Load Regulation for High
• Performance DSPs