MCP1653S-E/UN Overview

As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 2.7V~5.5V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 750kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Low Battery, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 10. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 3.3V. A search for "MCP1653" will reveal other relevant dc to dc converter ics. 10 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 100V voltage. It's important to remember that the dc dc regulator's normaloutput current is 560mA, so you should note it down when starting a new project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 850kHz. In order to limit the voltage of a dc switcher whose maximum input voltage is 5.5V, it must be limited by the user. Voltage 2V is necessary for the supply. Input current cannot exceed 100mA with this dc switcher. At its maximum, the switching converter can output 100V volts. At its lowest voltage, the voltage controller does not produce less than 3.3V.

MCP1653S-E/UN Features

Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION

MCP1653S-E/UN Applications

There are a lot of Microchip Technology
MCP1653S-E/UN DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery