A Tape & Reel (TR) case is used to deliver this IC regulator. This voltage regulator IC comes in a TO-243AA case. On the regulater IC chip, there are a total of 3 terminations. Output type Fixed. This component features 1 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. There is a temperature range of -40°C~125°C degrees during operation of the IC regulator. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. In terms of its current output, it is able to supply 200mA. A total of 3 pins can be found on the board. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. There are 3 pins on the chip. As an FYI, this IC voltage regulator has the basic part number MCP1700. This device is regulated with the FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR type of regulator. As you can see from the picture, the regulator IC is packed in a certain way. Taking into account the operation requirements, the maximum output current of the IC voltage regulator reaches 200mA. It operates in the 4μA Quiescent Current state. This model is a part of the -- Series and is of high quality. If the temperature is below 125 °C, it is recommended that you utilize this feature. It is recommended that the chip be operated at a temperature no lower than -40 °C operating temperature.
MCP1700T-1802E/MB Features
150mV dropout voltage TR method of packing The maximum operating temperature of -40 °C
MCP1700T-1802E/MB Applications
There are a lot of Microchip Technology MCP1700T-1802E/MB Linear Voltage Regulators applications.