A Tape & Reel (TR) case is used to deliver this IC regulator. This voltage regulator IC comes in a TO-236-3, SC-59, SOT-23-3 case. On the regulater IC chip, there are a total of 3 terminations. Output type Fixed. This component features 1 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. There is a temperature range of -40°C~125°C degrees during operation of the IC regulator. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. In terms of its current output, it is able to supply 200mA. A total of 3 pins can be found on the board. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. There are 3 pins on the chip. As an FYI, this IC voltage regulator has the basic part number MCP1700. An example of such a component would be this PMIC - Power Management ICs component. This device is regulated with the FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR type of regulator. As you can see from the picture, the regulator IC is packed in a certain way. Taking into account the operation requirements, the maximum output current of the IC voltage regulator reaches 250mA. It operates in the 4μA Quiescent Current state. This model is a part of the -- Series and is of high quality. A supply current of 1.6 uA is used to operate the voltage regulator IC. 2 % tolerance is what this regulator IC has, which is quite low.
MCP1700T-2202E/TT Features
150mV dropout voltage PMIC - Power Management ICs subtageroy TR method of packing 2 % tolerance
MCP1700T-2202E/TT Applications
There are a lot of Microchip Technology MCP1700T-2202E/TT Linear Voltage Regulators applications.