In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A TO-236-3, SC-59, SOT-23-3 case contains the Liner IC. In total, there are 3 terminations on the gadget. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 250mA. There are 3 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 3-pin is present on the chip. It is MCP1700 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A packing method for the IC regulator is TR, which means it is packed in a certain way. A maximum output current of 250mA is required to meet the operation requirements. It operates in the 4μA Quiescent Current state. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125 °C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40 °C.
MCP1700T-3602E/TT Features
178mV dropout voltage PMIC - Power Management ICs subtageroy TR method of packing The maximum operating temperature of -40 °C
MCP1700T-3602E/TT Applications
There are a lot of Microchip Technology MCP1700T-3602E/TT Linear Voltage Regulators applications.