In a Cut Tape (CT) case, the IC voltage regulator is delivered. A TO-243AA case contains the Liner IC. In total, there are 3 terminations on the gadget. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 200mA. There are 3 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 3-pin is present on the chip. It is MCP1702 for this voltage regulator IC, just for your information. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A packing method for the IC regulator is TAPE AND REEL, which means it is packed in a certain way. A maximum output current of 250mA is required to meet the operation requirements. It operates in the 5μA Quiescent Current state. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125 °C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40 °C.
MCP1702T-1202E/MB Features
1.1V dropout voltage TAPE AND REEL method of packing The maximum operating temperature of -40 °C
MCP1702T-1202E/MB Applications
There are a lot of Microchip Technology MCP1702T-1202E/MB Linear Voltage Regulators applications.