MCP1702T-3602E/MB Overview

In a Tape & Reel (TR) case, the IC voltage regulator is delivered. This voltage regulator IC comes in a TO-243AA case. On the Voltage regulator IC, there are 3 terminations that can be connected. Fixed is the IC Voltage Regulator's output type. In this electrical part, there are 1 regulators that are implemented. Surface Mount can be adjusted in the Linear IC in order to vary the temperature range over which Linear Regulator operates. The Voltage Regulated IC operates at a temperature of -40°C~125°C degrees, which is its operating temperature. As you can see, this regulator's output function is configured to be Positive. There is an 250mAmp current output on this voltage regulator IC. The regulator has a total of 1 outputs to make sure that it delivers prompt, sufficient outputs. A dropout voltage of 10 volts is what makes it a dropout voltage. Several pins on the chip are 3-shaped. It is MCP1702 for this voltage regulator IC, just for your information. In this case, we have a typical Other Regulators component. In order to pack the regulator, the method is TAPE AND REEL. It operates in the 5μA Quiescent Current state.

MCP1702T-3602E/MB Features

525mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing

MCP1702T-3602E/MB Applications

There are a lot of Microchip Technology MCP1702T-3602E/MB Linear Voltage Regulators applications.

• eBike
• Car wiper
• FPGA power
• Peripheral devices
• Battery-powered device
• Vibration sensor
• Engine management
• Power tool motor control
• High output current applications
• Medical Applications: Diagnostics and Imaging