A Tape & Reel (TR) case is used to deliver this IC regulator. This voltage regulator IC comes in a TO-243AA case. On the regulater IC chip, there are a total of 3 terminations. Output type Fixed. This component features 1 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. There is a temperature range of -40°C~125°C degrees during operation of the IC regulator. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. In terms of its current output, it is able to supply 250mA. In total, this chip consists of 3 pins and is divided into two groups. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. There are 3 pins on the chip. As an FYI, this IC voltage regulator has the basic part number MCP1702. This device is regulated with the Low Dropout Voltage type of regulator. As you can see from the picture, the regulator IC is packed in a certain way. Taking into account the operation requirements, the maximum output current of the IC voltage regulator reaches 250mA. It operates in the 5μA Quiescent Current state. This model is a part of the -- Series and is of high quality. If the temperature is below 125 °C, it is recommended that you utilize this feature. It is recommended that the chip be operated at a temperature no lower than -40 °C operating temperature. The top supply voltage can be set to 13.2V volts. Each of these 1 channels performs a specific task to keep the system functioning.
MCP1702T-5002E/MB Features
625mV dropout voltage TAPE AND REEL method of packing The maximum operating temperature of -40 °C
MCP1702T-5002E/MB Applications
There are a lot of Microchip Technology MCP1702T-5002E/MB Linear Voltage Regulators applications.