A Tube case is used to deliver this IC regulator. This voltage regulator IC comes in a TO-261-4, TO-261AA case. On the regulater IC chip, there are a total of 3 terminations. Output type Fixed. This component features 1 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. There is a temperature range of -40°C~125°C degrees during operation of the IC regulator. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. In terms of its current output, it is able to supply 200mA. In total, this chip consists of 4 pins and is divided into two groups. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. There are 3 pins on the chip. As an FYI, this IC voltage regulator has the basic part number MCP1703. An example of such a component would be this PMIC - Power Management ICs component. This device is regulated with the FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR type of regulator. Taking into account the operation requirements, the maximum output current of the IC voltage regulator reaches 230mA. It operates in the 5μA Quiescent Current state. This model is a part of the -- Series and is of high quality. If the temperature is below 125 °C, it is recommended that you utilize this feature. It is recommended that the chip be operated at a temperature no lower than -40 °C operating temperature. Each of these 1 channels performs a specific task to keep the system functioning.
MCP1703A-1202E/DB Features
330V dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40 °C
MCP1703A-1202E/DB Applications
There are a lot of Microchip Technology MCP1703A-1202E/DB Linear Voltage Regulators applications.