Cut Tape (CT) cases are used for delivery. The Liner regulator IC is packaged in TO-236-3, SC-59, SOT-23-3 case. On the Linear IC itself, there are 3 terminations. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 250mA from this regulator IC. There are a total of 3 pins on this board. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 3 pins. For your information, the basic part number for this regulator IC is MCP1703. There is one type of regulator for this device, which is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR. TAPE AND REEL is the way in which the voltage regulator IC is packed. In order to meet the operation requirements, its maximal output current reaches 250mA. It operates in the 5μA Quiescent Current state. This IC regulator is a part of the -- Series of devices.
MCP1703T-2802E/CB Features
625mV dropout voltage TAPE AND REEL method of packing
MCP1703T-2802E/CB Applications
There are a lot of Microchip Technology MCP1703T-2802E/CB Linear Voltage Regulators applications.